In order to save, produce and utilize comprehensively the species, the germplasm resources of B. platyphylla have been investigated and collected by the Northeast Forestry University (NEFU) over the past two decades. More than 30 provenances and 400 full-sibling, half-sibling families and clones of birch were collected from China, Finland, Canada, Russia, Kazakhstan and Japan, including B. pendula, B. kirghisorum, B. pendula ‘Purple Rain’, B. pendula ‘Dalecarlica’, B. populifolia and Japanese birch. In addition, 13 germplasm conservation test forests have been established in Northeast and North China. Based on the materials, the mechanism of marginal cleavage in B. pendula ‘Dalecarlica’ [11,12] and the variation of leaf colour in B. pendula ‘Purple Rain’ [13–15] were studied.

Due to the wide distribution of birch and environmental differences caused by geographic area, there were great differences between and within varieties. The longitude distribution range of birch in China is 42°07′(Zhaosu)∼130°01′(Wangqing), and latitude distribution range is 33°00′(Liupanshan)∼52°10′(Moerdaoga), where are mainly temperate continental monsoon climates (Table 1 and Fig. 1). Exploration and evaluation of 16 provenances in B. platyphylla were based on multiple breeding traits, and then Wangqing and Liangshui were preliminarily considered the optimal provenances [16]. Provenance tests were established in three different sites (Caohekou in Jilin Province, Maoershan in Heilongjiang Province and Jinhe in Mongolia autonomous region) in Northeast China in 1997 (Fig. 1). After that, further studies of provenance were conducted based on the above materials. For example, the height of B. platyphylla from different provenances was negatively correlated with latitude and positively correlated with longitude when the trees were 4-year-old [17]. Three excellent provenances for cellulose timber (Dongfanghong, Maoershan and Wuyiling) were identified from fourteen provenances of 10-year-old B. platyphylla in the Maoershan test site [18]. Growth traits and wood properties of eighteen B. platyphylla provenances in three trial sites were also investigated and analyzed, which suggested that there existed significant differences among different sites and also in site × provenance interaction. Ultimately, twelve elite provenances were selected based on growth traits including 6 provenances for Maoershan site, 3 for Caohekou site and 3 for Jinhe site, respectively [19].

Selective breeding is usually required for tree genetic improvement to obtain superior clones and families. Due to the low survival rate of cutting and grafting in B. platyphylla, families and clones were important materials in the breeding research. Researchers made studies on the selection of elite families, which included higher yield, wood characteristics, and stress resistance of forest trees [5,20–22]. For instance, tree height and ground diameter were investigated among 21 half-sib families of 2-year-old B. platyphylla, and 8 elite families with higher tree height and 7 families with wider ground diameter were selected [21]. Based on 11 growth characters, 17 half-sib families of B. platyphylla were evaluated, and two families were selected as excellent families [5]. Growth traits of 53 half-sibling families in B. platyphylla at three different sites were investigated, including the height, timber volume and diameter at breast height. Thereafter, based on the breeding values, 11 families (B34, B15, B28, B16, B51, B40, B42, B45, B48, B35 and B19) were rated as superior families, whose mean timber volumes were 8.29%, 9.80% and 13.60% higher than the average of all the families planted in Langxiang, Maoershan and Jilin [22]. In addition, the growth traits of 37 B. platyphylla clones were evaluated; subsequently, seven superior clones were identified, whose mean height, ground diameter and number of lateral branches were 11.31%, 9.91% and 8.93% higher than the average of all the clones, respectively [23]. In another study, five superior clones of B. platyphylla were selected according to plant height, ground diameter and volume after fertilization [24].

Wood is one of the most dominant renewable resources for human beings [25], and its properties could be roughly divided into five categories: (1) Mechanical properties (e.g., longitudinal growth strain, modulus of elasticity, strength), (2) Technological characteristics (e.g., splitting index), (3) Physical properties (e.g., wood density, shrinkage), (4) Anatomical properties (e.g., fiber length, fiber thickness, coarseness), (5) Chemical properties (e.g., cellulose and lignin content, lignin composition) [26]. The estimated values for some wood properties of B. platyphylla are shown in Table 2 [7,27–29]. Wood properties (chemical properties of wood, fiber length and width, content of lignin, cellulose, and holocellulose) among 31 seed trees of tetraploid B. platyphylla were measured, which suggested that 19 tetraploid individuals with excellent wood properties can be used as the preferred variety of pulpwood [29]. In addition, other properties of wood such as the wood moisture content, air-dry density, oven-dry density, flexural strength, elastic modulus, shear strength, compressive strength parallel to the grain, and compressive strength stripes of B. platyphylla were also investigated, and 6 elite half-sib families in northeast China were deemed superior based on wood properties [7]. Regarding growth and wood properties, tree height, diameter at breast height, fiber aspect ratio, and hemicellulose content of 36 half-sib B. platyphylla families were researched, and the results indicated that 13 excellent families were identified [30].

Forest trees are vulnerable to natural and unnatural factors due to the complex climate, soil types, and complicated geographical environments. It is necessary to strengthen resistance breeding [31], including cold resistance, drought resistance, and saline-alkali resistance. Temperature is an essential environmental factor that seriously affects the growth, development, and geographical distribution of plants [32]. The enzyme recovery system of B. platyphylla was affected by low temperature; for example, some birches from warm climates in Europe were introduced and planted in higher latitudes/colder areas in China, and the growth and physiological characters were slightly lower than those of native B. platyphylla [33]. Promoted lignification and enhanced cold resistance of the seedlings were observed when the leaves of B. platyphylla were sprayed with potassium chloride, potassium dihydrogen phosphate, borax, and boric acid [34]. Drought is another important abiotic stress during tree growth and development [35] The drought tolerance of forest species has been investigated earlier. In 1973, Hsiao studied plants’ adaptation mechanisms to drought stress and put forward a specific standard for the water stress gradient in mesophytes. For B. platyphylla seedlings, the accumulation of malondialdehyde (MDA) decreased and the soluble sugar content significantly increased with the deepening of drought stress [36]. The leaves of 2-year-old B. platyphylla were sprayed with different concentrations of paclobutrazol (a kind of plant growth retardant), and then the drought resistances were evaluated by the membership function method. It was found that the drought resistance of seedlings treated with paclobutrazol was improved when the solution concentration was 750 mg L⁻¹ [37].

Salt stress could inhibit plant growth and affect plant photosynthesis, protein synthesis, energy and fat metabolism [38]. There have been increasing studies on salt resistance of trees in recent years. Compared with other broadleaf species (such as Vlmus pumila, Fraxinus mandshurica and Tilia amurensis), the salt resistance of B. platyphylla is relatively weak by evaluating the plasma membrane permeabilities, which is an ideal indicator for studying salt resistance [39]. Introducing plants is also a good way to resistance breeding, and the salt-resistance of one-year seedlings of B. kirghisorum, B. pendula and B. pubescens brought from Kazakhstan, and the local B. platyphylla, were studied. The results showed that B. kirghisorum had the strongest resistance to neutral salt and B. kirghisorum and B. pubescens had more resistance to alkaline salt at high concentrations [40]. Moreover, growth traits and physiological characters from diverse B. platyphylla families showed significantly differences under salt stress, and the nine families with elite salt resistance were selected [41].

Polyploidy is a ubiquitous phenomenon in higher plants [42,43]. The increase in chromosomes could result in increased gene dosages and cell volumes [44]. Therefore, polyploid plants usually have larger leaves, greater height and diameter, and increased ability to adapt to environment [45]. In order to obtain various ploidy materials, seeds of B. platyphylla were soaked in 0.1% colchicine, and 101 tetraploid individuals in total were obtained in the year of 2004 and 2009. Compared with diploids, these tetraploids showed larger leaf areas but shorter tree height during the seedling stages. Triploids were obtained by hybridization between diploid and tetraploid in B. platyphylla, and germination rate of the hybrid seeds were 3.33–45.33%; growth traits (tree height, leaf area and photosynthetic rate) of triploids were superior to those on diploids in current-year seedlings [46]. However, the growth traits (including tree height, diameter at breast height and volume) of 21 three-year-old B. platyphylla families from different ploidy level were investigated, which suggested that most diploid families were better than tetraploid and triploid families [47].

The Human Genome Project (HGP) [52] promoted the development of genome sequencing technology, which plays a crucial role in the field of modern genetic research. In 2000, the whole genome sequencing of Arabidopsis thaliana was accomplished by using the first generation of sequencing technology [53], which opened the door to the whole genome of plants. Afterward, the draft genome of Populus trichocarpa had been reported, which was the first woody plant to have its genome fully sequenced. There were important guiding significance for exploring the origin and evolution of woody plants, mapping and cloning of essential functional genes, and molecular marker-assisted selection. Until now, the whole genome sequencing has been completed on more than 40 woody plant species [54]. A whole-genome reference sequence for the diploid species B. nana (dwarf birch) was generated, which is the keystone woody species of subarctic scrub communities [55]. Then, silver birch (B. pendula) was sequenced and a reference genome from a fourth-generation inbred line was assembled, which showed high similarity with B. platyphylla [56]. Recently, researchers sequenced the B. platyphylla genome and assembled the sequences into 14 chromosomes, which facilitated the identification of important and essential genes governing important traits of trees and genetic improvement of B. platyphylla [57].

Molecular markers are essential tools for genetic improvement, which can be applied to germplasm evaluation, genetic analysis and maker-assisted breeding. Multiple molecular markers were effectively used for genetic diversity, population structure and marker-trait association analysis of B. platyphylla. Random amplified polymorphic DNA (RAPD) is a convenient method to detect genetic diversity, which is based on the polymerase chain reaction (PCR) using randomly synthesized oligonucleotides (10 bp) as primers. The provenance division and genetic variation among 13 provenances of B. platyphylla in China were studied by using RAPD. The results showed that the differentiation of the percentage of polymorphic loci (PPL) among different provenances was evident, ranging from 20.17% to 32.19%. Among them, Maoershan provenance and Qingyuan provenance had the higher percentages of PPL; in contrast, Chuoer provenance had the lowest PPL percentage [58]. The fragment BFL significantly related to fiber length was selected from 100 B. platyphylla individuals with long-fiber using the RAPD technology. Then, BFL was successfully transformed into a sequence characterized amplified region (SCAR) marker by which the identification rate of long fiber B. platyphylla was more than 70% [59]. Using simple sequence repeat (SSR), four amplified fragments related to fiber length were identified in B. platyphylla [60]. In addition, genetic diversities of 41 white birch genotypes collected from 6 different geographical regions were analyzed using SSR markers. The result indicated that 111 selected SSR loci showed low to moderate similarity (0.025–0.610); by UPGMA-based clustering analysis of the allelic constitution, the six different geographical regions were further separated into four clusters: Cluster I, Huanren and Liangshui provenances; Cluster II, Xiaobeihu and Qingyuan provenances; Cluster III, Finland provenance; Cluster IV, Maoershan provenances [61]. Using ISSR (inter-simple sequence repeat) markers, 15 provenances from the provenance trial in Maoershan, and the result showed the range of the percentages of polymorphic loci was 48.03%∼62.20% [62]. Furthermore, some studies about genetic linkage maps of B. platyphylla were also based on molecular markers, such as ISSR and AFLP (Amplified fragment length polymorphism) [63].

Genetic engineering has emerged as a method with high potential to modify traits more precisely and made functional genomics studies more efficiently. In the last decade, improving plant traits through genetic engineering has become an area of increased focus. Tree genetic engineering has advanced to the point at which genes for desirable traits can now be introduced and expressed efficiently [64,65]. Here, we describe major scientific discoveries on genetic engineering in terms of insect resistant, abiotic stress, wood property modification and flowering in B. platyphylla.